![]() Selected point - Select a vertex or an edge for the triad origin.Model origin - Uses the coordinate system (WCS) origin of the current part for the tool origin.Setup WCS origin - Uses the workpiece coordinate system (WCS) origin of the current setup for the tool origin.The Origin drop-down menu offers the following options for locating the triad origin: Use this if your model does not contain a suitable point & plane for your operation. This uses both the origin and orientation of the existing coordinate system. Select coordinate system - Sets a specific tool orientation for this operation from an Inventor User Coordinate System (UCS) in the model.Both the X and Y axes can be flipped 180 degrees. ![]() Select X & Y axes - Select a face or an edge to define the X axis and another face or edge to define the Y axis.Both the Z and Y axes can be flipped 180 degrees. Select Z axis/plane & Y axis - Select a face or an edge to define the Z axis and another face or edge to define the Y axis.Both the Z and X axes can be flipped 180 degrees. Select Z axis/plane & X axis - Select a face or an edge to define the Z axis and another face or edge to define the X axis. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |